In this tutorial, we will guide you through the process of creating a new gauge type using the Calibration Management Module in the Artintech ERP system. This feature is essential for businesses that require accurate and consistent measurements to maintain quality standards. By following these steps, you can ensure that all your measuring devices are calibrated and functioning correctly.
Step 1: Access the Calibration Section
Start from the dashboard of your Artintech ERP system. Scroll down to the calibration section and click on it.
Step 2: Select Gauge Types
Once you’re in the calibration section, click on ‘Gauge Types’.
Step 3: Create a New Gauge Type
In the Gauge Type list, click on ‘New’ to create a new gauge type.
Step 4: Enter Gauge Type Details
Here, you will need to enter the details of your new gauge type. For example, if your gauge type is in inches, you would enter that information here. Also, specify the measuring range and resolution. For instance, the measuring range could be from 2 to 3 inches, and the resolution could be 0.001.
Step 5: Add Calibration Instructions
Scroll down and add any calibration instructions. For example, you might need to control the humidity during calibration.
Step 6: Add Parameters
Next, add in your parameters. For instance, you might have a parameter named ‘Size 1’ with a measuring size of 2.000 and a tolerance of 0.001.
Step 7: Save Your Information
Once you’ve entered all the necessary information, scroll down and click ‘Save’. Repeat this process for any additional sizes you need to add.
Step 8: Attach Relevant Documents
Scroll down to the attachment box and click ‘New’ to add any applicable standards and relative documents.
Step 9: Finalize and Save
After entering all your information, scroll down and click ‘Save’ one more time to finalize the new gauge type.
And that’s it! You’ve successfully created a new gauge type in the Calibration Management Module of the Artintech ERP system. This process will help ensure accurate measurements, compliance, and efficiency for your business.
For more detailed information about the Calibration Control Module, visit the Artintech ERP website.
#Hashtags #ArtintechERP #CalibrationManagement #QualityControl #ERPSoftware #BusinessEfficiency
Relevant page: Calibration Control – Artintech
